Mechanical Systems

• Material: SS 304
• Junction line: +/-1.5mm
• Output: Plastic, Glass & Steel bottle

Product:

 Round Flat Bottles. Suitable for 20 to 90 mm Dia.

 Production Capacity:

50-60 bottles per Min

 Machine Features:

1. Automatic operations, except container feeding (manually)

2. Easy serviceable

3. Less weight and sturdy

4. Economically priced

5. Acrylic covers from all sides

6. Shrink tunnel for shrink sleeving the container

 Technical Specifications:

 1. Structure of SS material

2. Feed screw for feeding the containers

3. For conveying motor of  bonfiglioli (Italy) make

4. Imported AC frequency variable drive of Scheneider (France) make with constant torque

5. PLC will be of Scheneider Make.

6. Electrical hardware’s for the Panel

7. Dimension of the shrink tunnel: 1200mm x 450mm x 600mm

8. Blower motor

9. For heating purpose tubular heater

10. Specially designed motor for web feeding

11. Motor for sleeve pusher unit

12. Sensor for sensing the Produc
Essentials:

 1. Containers Sleeves should be of proper quality

2. Material to be used for shrinks OPS, PET PVC

3. Length of Sleeve: 30mm to 200mm

4. Lay flat Width: 40mm to 170mm

5. Electric Supply: 220V +/- 10%, 50Hz, 3 Phase neutral Earth

 Working of the Machine:

 Changed parts will be used to change the machine according to the required

container

 • The containers will be loaded on the conveyor manually and it will be fed to the

sleeve applicator machine with the help of feed screw.

 • As soon as the containers comes, the sensor senses it, the servo motor

combination starts operating and after the cutter cuts the sleeve of required

length through sleeve pusher unit, and then the containers will be out with the

applied sleeves.

 • Further the containers with applied sleeves will pass through the shrink tunnel

for shrinking.

COMPLETE DETAILES AND SPECIFICATIONS

AUTOMATIC SHRINK WRAPPING

Film Packing Machine is specially used for packing bottle water, juice, wine, beer, etc. It uses plastic film for packing bottle water. It includes automatic packing machine and pyrocondensation machine. Film Packing Machine is equipped with transducer, which can adjust various speeds for packing bottle water. Pyro condensation machine has double-cycle system, which can save cost and assure the packing quality. The cutting system abides by international rules and with best sealing quality.

Technical Specifications:

Power Source 220V, 50Hz

Power 18KW

Air pressure 4-6kg/cm2

Capacity 6-8 Packs per Minute

Max packing size 500mm x 400mm approx

Dimension 1200x1100x1950mm approx

• Latest label-pasting main engine in Sweden.
•  Speed: from 60-90 BPM
•  Junction line error: +/-1.5mm
•  Main engine is controlled by three-phase converter motor made of stainless steel SUS#304
•  PLC control system
•  Disc label-pasting and label-adsorbing
•  Include such mechanisms as label-providing, belt-conveying, label-cutting,
•  wheels-attaching, vacuum-adsorbing, hot sol-conveyance
•  Hot sol providing machine is made in a hundred million Hertz. (Taiwan standard)
•  VAC and PUMP don¡¯t start working unless the hot sol machine gets to designed temperature.
•  STOP(ALARM) installation for label running-out
•  STOP installation for pasting failure
•  Applied to different specifications of packing for food, chemical, medicine, cosmetic and daily necessities
•  Bottle material: Plastics, glass, steel, etc
•  Made of stainless steel SUS#304 and imported T6 aluminum alloy after being anode hardened
•  Adjustable label-pasting speed of main engine
•  Imported optical-fiber electronic eye
•  Imported conveyer belt
• Separation sets for each

• Latest label-pasting main engine in Sweden.
•  Speed: from 60-90 BPM
•  Junction line error: +/-1.5mm
•  Main engine is controlled by three-phase converter motor made of stainless steel SUS#304
•  PLC control system
•  Disc label-pasting and label-adsorbing
•  Include such mechanisms as label-providing, belt-conveying, label-cutting,
•  wheels-attaching, vacuum-adsorbing, hot sol-conveyance
•  Hot sol providing machine is made in a hundred million Hertz. (Taiwan standard)
•  VAC and PUMP don¡¯t start working unless the hot sol machine gets to designed temperature.
•  STOP(ALARM) installation for label running-out
•  STOP installation for pasting failure
•  Applied to different specifications of packing for food, chemical, medicine, cosmetic and daily necessities
•  Bottle material: Plastics, glass, steel, etc
•  Made of stainless steel SUS#304 and imported T6 aluminum alloy after being anode hardened
•  Adjustable label-pasting speed of main engine
•  Imported optical-fiber electronic eye
•  Imported conveyer belt
• Separation sets for each

• Latest label-pasting main engine in Sweden.
•  Speed: from 60-90 BPM
•  Junction line error: +/-1.5mm
•  Main engine is controlled by three-phase converter motor made of stainless steel SUS#304
•  PLC control system
•  Disc label-pasting and label-adsorbing
•  Include such mechanisms as label-providing, belt-conveying, label-cutting,
•  wheels-attaching, vacuum-adsorbing, hot sol-conveyance
•  Hot sol providing machine is made in a hundred million Hertz. (Taiwan standard)
•  VAC and PUMP don¡¯t start working unless the hot sol machine gets to designed temperature.
•  STOP(ALARM) installation for label running-out
•  STOP installation for pasting failure
•  Applied to different specifications of packing for food, chemical, medicine, cosmetic and daily necessities
•  Bottle material: Plastics, glass, steel, etc
•  Made of stainless steel SUS#304 and imported T6 aluminum alloy after being anode hardened
•  Adjustable label-pasting speed of main engine
•  Imported optical-fiber electronic eye
•  Imported conveyer belt
• Separation sets for each

 Product:

 Round Flat Bottles. Suitable for 20 to 90 mm Dia.

 Production Capacity:

50-60 bottles per Min

 Machine Features:

1. Automatic operations, except container feeding (manually)

2. Easy serviceable

3. Less weight and sturdy

4. Economically priced

5. Acrylic covers from all sides

6. Shrink tunnel for shrink sleeving the container

 Technical Specifications:

 1. Structure of SS material

2. Feed screw for feeding the containers

3. For conveying motor of  bonfiglioli (Italy) make

4. Imported AC frequency variable drive of Scheneider (France) make with constant torque

5. PLC will be of Scheneider Make.

6. Electrical hardware’s for the Panel

7. Dimension of the shrink tunnel: 1200mm x 450mm x 600mm

8. Blower motor

9. For heating purpose tubular heater

10. Specially designed motor for web feeding

11. Motor for sleeve pusher unit

12. Sensor for sensing the Product
 

Essentials:

 1. Containers Sleeves should be of proper quality

2. Material to be used for shrinks OPS, PET PVC

3. Length of Sleeve: 30mm to 200mm

4. Lay flat Width: 40mm to 170mm

5. Electric Supply: 220V +/- 10%, 50Hz, 3 Phase neutral Earth

 Working of the Machine:

 Changed parts will be used to change the machine according to the required container

 • The containers will be loaded on the conveyor manually and it will be fed to the

sleeve applicator machine with the help of feed screw.

 • As soon as the containers comes, the sensor senses it, the servo motor

combination starts operating and after the cutter cuts the sleeve of required

length through sleeve pusher unit, and then the containers will be out with the

applied sleeves.

 • Further the containers with applied sleeves will pass through the shrink tunnel

for shrinking.

• Latest label-pasting main engine in Sweden.
•  Speed: from 60-90 BPM
•  Junction line error: +/-1.5mm
•  Main engine is controlled by three-phase converter motor made of stainless steel SUS#304
•  PLC control system
•  Disc label-pasting and label-adsorbing
•  Include such mechanisms as label-providing, belt-conveying, label-cutting,
•  wheels-attaching, vacuum-adsorbing, hot sol-conveyance
•  Hot sol providing machine is made in a hundred million Hertz. (Taiwan standard)
•  VAC and PUMP don¡¯t start working unless the hot sol machine gets to designed temperature.
•  STOP(ALARM) installation for label running-out
•  STOP installation for pasting failure
•  Applied to different specifications of packing for food, chemical, medicine, cosmetic and daily necessities
•  Bottle material: Plastics, glass, steel, etc
•  Made of stainless steel SUS#304 and imported T6 aluminum alloy after being anode hardened
•  Adjustable label-pasting speed of main engine
•  Imported optical-fiber electronic eye
•  Imported conveyer belt
• Separation sets for each